Windsurfing Trailer Build

I bought a second hand trailer from a guy in Newcastle who had it to transport two Quad bikes. It is long and narrow. This picture is of my magnetic drill drilling into the uprights. I knew I had a magnetic drill for some reason!

---

I built the frame to enclose the trailer out of timber, LVLs. The original trailer is and was way out of square. I cant weld and timber is easy to work with but I may come to regret this decision.

---

I cladded the the frame with formwork as it is plywood that lasts and is cheaper than marine ply.

---

I attached new a number plate as the old one was mangled and also new LED lights. The lights where to become a problem as you new a load adapter for VW so as to not short out modern cars!

---

Aluminium composite panel is glued and fixed to the form ply. I measured and draw up each piece in AutoCAD and sent the DXF files to David Petrie in Cromer who has a CAD/CAM.
One side of the the trailer is red for Severne branding. This trailer will become the Test Centre for Severne in the Sydney Market.

---

Harken Hardware for the sliding doors on the both sides with polished Stainless Steel patch plates, well you got to have some bling!

---

The port side is Black for Patrik Boards signage.

---

Racking and fake grass make up the interior. I'm hoping to house 9 or 10 boards inside. It is just wide enough for the Formula board.
There is still work to be done in the coming weeks, trims, signage and probably changes to design! :-)

---